Atm Settings; Figure 42: Atm Settings - SMC Networks SMC7904WBRAS-N2 V2 User Manual

ATM S
ETTINGS
selected, the WAN interface IP address is assigned by the remote
DHCP server.
Local IP address — The IP address of the WAN interface provided
■
by the ISP.
Gateway — The IP address of the remote gateway router provided
■
by the ISP.
Netmask — The subnet mask for the local IP address.
■
Default Route — Enables or disables the default route IP address.
■
Unnmbered — Enables the IP unnumbered feature.
■
The ATM Settings page is used to configure the settings between your
ADSL Router and the remote ATM PVC switch, including connection mode
(single or multiple service over one connection), and packet level QoS.
The ATM Settings parameters form a Traffic Contract that informs the
network what type of traffic is to be transported and the performance
requirements of the traffic.

Figure 42: ATM Settings

The following items are displayed on this page:
◆ Select — Clicking the radio button associated with the connection
makes the parameters editable.
VPI (Virtual Path Identifier) — Adds a VPI entry to the table. (Range:
◆
0-255; Default: 0)
– 84 –
| WAN Settings
C 7
HAPTER

ATM Settings