Step 3 - Adsl Settings; Figure 9: Wizard Step 3 - Adsl Settings - SMC Networks SMC7904WBRAS-N2 V2 User Manual

Server IP – Specifies the IP address of a public NTP time server on the
◆
Internet.
Interval – Specifies the time interval for polling the NTP server.
◆
Time Zone – A drop-down box provides access to predefined time
◆
zones. Each choice indicates it's offset from GMT and lists at least one
major city or commonly known zone name covered by the time zone.
The third page of the wizard configures the ADSL country settings, Internet
S 3 - ADSL
TEP
service provider, protocol, connection type and username and password.
S
ETTINGS

Figure 9: Wizard Step 3 - ADSL Settings

The following items are displayed on the first page of the Wizard:
Country — Choose your country of operation from the drop down
◆
menu. If your country is not listed, contact your service provider for
detailed settings.
◆ Internet Service Provider — The chosen country will determine the
list of available Internet Service Providers. Choose the service provider
with which you have a contract.
Protocol — The protocol used will be specified by your service
◆
provider. Choose from the following options:
■
■
PPPoE — Point-to-Point Protocol over Ethernet (PPPoE).
PPPoA — Point-to-Point Protocol over Asynchronous Transfer Mode
(PPPoA).
– 41 –
| System Configuration
C 3
HAPTER
Setup Wizard