Dhcp Relay; Figure 37: Dhcp Relay - SMC Networks SMC7904WBRAS-N2 V2 User Manual

Dynamic Host Configuration Protocol (DHCP) can dynamically allocate an
DHCP R
ELAY
IP address and other configuration information to network clients that
broadcast a request. To receive the broadcast request, the DHCP server
would normally have to be on the same subnet as the client. However,
when the access point's DHCP relay agent is enabled, received client
requests can be forwarded directly by the access point to a known DHCP
server on another subnet. Responses from the DHCP server are returned to
the access point, which then broadcasts them back to clients.

Figure 37: DHCP Relay

The following items are displayed on this page:
DHCP Mode — When set to "DHCP Relay," enables routing of the DHCP
◆
service to units on a different subnet.
Relay Server — Enter the address of the DHCP server for routing to
◆
other units.
– 77 –
| LAN Settings
C 6
HAPTER
DHCP Settings