SMC Networks SMC7904WBRAS-N2 V2 User Manual page 38

Table 2: Configuration Menu (Continued)
Menu Description
Statistics Shows the network traffic statistics
DSL Statistics Shows the ADSL line statistics
ARP Shows entries in the ARP table
Wireless
Basic Settings Configures basic wireless settings
Advanced Settings Configures advanced wireless settings
Security Configures wireless security settings
Access Control Configures wireless access control settings
WPS Configures WPS security
MBSSID Enables multiple SSID interfaces
WDS Configures Wireless Distribution System settings
LAN Interface
LAN Interface Configures the LAN management interface, including IP
address, and IGMP snooping on LAN side
IPv6 LAN Config Configures IPv6 LAN settings
DHCP Config
DHCP Mode Sets DHCP server and DHCP relay settings
Static IP Configures static DHCP assignments
WAN Interface
Channel Config Configures the DSL channel settings
ATM Settings Configures DSL ATM settings
ADSL Settings Configures ADSL settings
Services
DNS
DNS Server Configures DNS server settings
IPv6 DNS Configures IPv6 DNS server settings
Dynamic DNS Configures DDNS settings
Access Control List
ACL Config Configures ACLs for LAN or WAN interfaces
IP/Port Filtering Configures IP filtering settings
NAT/NAPT
Virtual Server Configures the virtual server forwarding table
NAT Exclude IP Configures excluded IPs on the WAN interface
NAT Forwarding Configures forwarding for access to local servers
NAT ALG and Pass- Configures NAT passthrough for specific application
Through protocols
NAT Port Trigger Restricts Internet access for specific ports
– 38 –
| System Configuration
C 3
HAPTER
Using the Web Interface
Page
50
51
52
55
57
59
64
65
66
68
73
74
76
80
82
84
86
89
89
90
92
95
97
99
99
100
101