Figure 50: NAT — Virtual Servers
The following items are displayed on this page:
Service Type – Sets a name to describe the virtual server service.
◆
Usual Service Name – Select a name from the list of common
■
applications.
User-defined Service Name – Set a custom name to describe the
■
service.
Protocol – Specifies the port type. (Options: TCP or UDP; Default:
◆
TCP)
WAN Setting – Selects a WAN interface or IP address. Depending on
◆
the selection, either the WAN Interface or WAN IP Address setting
displays.
WAN Interface – Select the WAN interface for the virtual server.
■
WAN IP Address – Specify the WAN IP address for the virtual
■
server.
WAN Port – Specifies the public TCP/UDP port number, or port range,
◆
used for the service on the WAN interface. (Range: 1-65535)
LAN Open Port – Specifies the TCP/UDP port number, or port range,
◆
used on the local server for the service. (Range: 1-65535)
LAN IP Address – The IP address of the server on the local Ethernet
◆
network. The specified address must be in the same subnet as the
router and its DHCP server address pool. (Range: 192.168.2.2 to
192.168.2.254)
– 98 –
| Services
C
8
HAPTER
NAT/NAPT Settings