Dhcp Settings; Dhcp Disabled; Figure 36: Dhcp Disabled - SMC Networks SMC7904WBRAS-N2 V2 User Manual

Adsl2 barricade n 4-port adsl/adsl2+ wireless router
Hide thumbs Also See for SMC7904WBRAS-N2 V2:
Table of Contents

Advertisement

DHCP S
ETTINGS
DHCP D
ISABLED
portion is automatically generated using the modified EUI-64 form
of the client identifier (that is, the client MAC address).
IPv6 Address Pool — The address range available for DHCPv6
assignment.
Prefix Length — The length of the IPv6 address prefix sent in DHCPv6
assignments. For IPv6 unicast addresses, this is set to 64.
Preferred Time — The time over which assigned addresses are
preferred.
Valid Time — The time over which the assigned addresses are valid.
DNS Servers — Specifies up to three IPv6 Domain Name servers for
IPv6 addresses.
The ADSL Router includes a Dynamic Host Configuration Protocol (DHCP)
server that can assign temporary IP addresses to any attached host
requesting the service, as well as a DHCP relay serivce that will route the
DHCP service to other subnets than that of the unit.
By selecting "None," you can disable DHCP on the ADSL Router.

Figure 36: DHCP Disabled

The following items are displayed on this page:
DHCP Mode — When set to "None," disables DHCP on the unit.
– 76 –
| LAN Settings
C
6
HAPTER

DHCP Settings

Advertisement

Table of Contents
loading

Table of Contents