Access Control Lists; Lan Acls; Figure 47: Lan Acl Configuration - SMC Networks SMC7904WBRAS-N2 V2 User Manual

A C L
CCESS ONTROL
LAN ACL
S
ISTS
The ADSL Router supports Access Control Lists that filter IP addresses
allowed access on the unit's LAN and WAN interfaces. Only traffic from IP
addresses in the ACL table are allow access to the ADSL Router.
When you select LAN for the ACL "direction," you can configure ACLs that
apply to the LAN interfaces.

Figure 47: LAN ACL Configuration

The following items are displayed on this page:
LAN ACL Switch — Enables LAN ACLs on the ADSL Router.
◆
(Default: Disabled)
Do not enable ACLs without first configuring your host IP address in
N :
OTE
the ACL table, otherwise you will not be able to access the unit.
Apply Changes — Implements the ACL settings on the ADSL Router.
◆
IP Address — Specify a LAN IP address or range of addresses that are
◆
allowed access to the ADSL Router.
Services Allowed — Specifies services that are allowed access from
◆
LAN interfaces, or allows "any."
Add — Adds the ACL to the ACL Table.
◆
– 92 –
| Services
C 8
HAPTER

Access Control Lists