Snmp Protocol Configuration; Figure 70: Snmp Configuration - SMC Networks SMC7904WBRAS-N2 V2 User Manual

SNMP P C
ROTOCOL ONFIGURATION
Simple Network Management Protocol (SNMP) is a communication protocol
designed specifically for managing devices on a network. SNMP is typically
used to configure devices for proper operation in a network environment,
as well as to monitor them to evaluate performance or detect potential
problems.
The ADSL Router can be managed locally or remotely by SNMP.

Figure 70: SNMP Configuration

The following items are displayed on this pages:
SNMP — Enables/disables SNMP. (Default: Enabled)
◆
System Description — A name given to identify the ADSL Router.
◆
System Contact — The name of the system contact person.
◆
System Name — A description of the unit. (Default: Wireless ADSL
◆
Modem/Router)
◆ System Location — The location of the ADSL Router.
Trap IP Address — Destination IP address of the SNMP trap.
◆
Community Name (Read-only) — Name of the read-only
◆
community. This read-only community allows read operation to all
objects in the Management Information Base (MIB).
◆ Community Name (Read-Write) — Name of the write-only
community. This write-only community allows write operations to
objects defined as read-writable in the MIB.
– 121 –
| Advanced
C 9
HAPTER

SNMP Protocol Configuration