Initial Configuration; Isp Settings; Connecting To The Login Page - SMC Networks Barricade N SMCWBR14S-N4 User Manual

4
ISP S
ETTINGS
C
ONNECTING TO THE
I C
NITIAL ONFIGURATION
The Wireless Broadband Router offers a user-friendly web-based
management interface for the configuration of all the unit's features. Any
PC directly attached to the unit can access the management interface using
a web browser, such as Internet Explorer (version 6.0 or above).
If you are not sure of your connection method, please contact your
Internet Service Provider. There are several connection types to choose
from: Static IP, DHCP (cable connection), PPPoE (DSL connection), and
PPTP.
If using the PPPoE option, you will need to remove or disable any
N :
OTE
PPPoE client software on your computers.
L P
OGIN AGE
It is recommended to make initial configuration changes by connecting a
PC directly to one of the Wireless Broadband Router's LAN ports. The
Wireless Broadband Router has a default IP address of 192.168.2.1 and a
subnet mask of 255.255.255.0. You must set your PC IP address to be on
the same subnet as the Gateway Router (that is, the PC and Gateway
Router addresses must both start 192.168.2.x).
To access the Wireless Broadband Router's management interface, follow
these steps:
Use your web browser to connect to the management interface using
1.
the default IP address of 192.168.2.1.
Log into the interface by entering the default username "admin" and
2.
password "smcadmin," then click Login.
It is strongly recommended to change the default user name and
N :
OTE
password the first time you access the web interface. For information on
changing user names and passwords, See
page 100.
– 38 –
"System Management" on