The following items are displayed on this pages:
ACS
Defines the Auto Configuration Server parameters.
Enable — Enables/disables TR-069 support. (Default: Enabled)
◆
URL — Speceifies the URL required for the CPE to connect to the ACS.
◆
User Name — Enter the user name that the ADSL Router should use
◆
when connecting to the ACS.
Password — Enter the password that the ADSL Router should use
◆
when connecting to the ACS.
Periodic Inform Enable — When this field is enabled, the DSL device
◆
will send an Inform RPC to the ACS server at the system startup, and
will continue to send it periodically at an interval defined in Periodic
Inform Interval field; When this field is disabled, the DSL device will
only send Inform RPC to the ACS server once at the system startup.
(Default: Enabled)
Periodic Inform Interval — Time interval in seconds to send Inform
◆
RPC.
C
R
ONNECTION
EQUEST
Defines the connection from the ADSL Router to the ACS.
User Name — The user name the remote ACS should use when
◆
connecting to this device.
Password — The password the remote ACS should use when
◆
connecting to this device.
◆
Path — The path of the device ConnectionRequestURL. The device
ConnectionRequestURL should be configured based on the Device_IP,
Path and Port as follows: http://Device_IP:Port/Path
Port — The port of the device ConnectionRequestURL.
◆
D
EBUG
Sets options for displaying debug messages for the ACS connection.
ACS Certificates CPE — Selects if digital certificates are used on the
◆
CPE.
Show Message — Displays ACS SOAP messages on the serial console.
◆
CPE sends GetRPC — The router contacts the ACS to obtain Remote
◆
Procedure Call methods.
– 138 –
| Administration Settings
C
11
HAPTER
TR-069 Configuration