Source IP Address — Specifies the source IP address to block or allow
◆
traffic from.
Destination IP Address — Specifies the destination IP address to
◆
block or allow traffic from.
Subnet Mask — Specifies a subnet mask.
◆
Source Port — Specifies a range of ports to block traffic from the
◆
specified LAN IP address.
Destination Port — Specifies a range of ports to block traffic from the
◆
specified LAN IP address from reaching.
Apply Changes — Adds a newly configured packet filter that denies
◆
forwarding in to the local area network to the list.
C
F
T
URRENT
ILTER
ABLE
The Current Filter Table displays the configured IP addresses and ports that
are permitted or denied access to and from the ADSL Router.
Rule — Displays if the specified traffic is allowed or denied.
◆
Protocol — Displays the destination port type.
◆
Source IP/Mask — Displays the source IP address.
◆
◆
SPort — Displays the source port range.
Dest IP/Mask — Displays the destination IP address.
◆
DPort — Displays the destination port range.
◆
State — Indicates if an entry is enabled.
◆
◆
Direction — Displays the direction in which the rule has been applied.
Action — Enables/disables or deletes the selected entry from the table.
◆
– 96 –
| Services
C
8
HAPTER
IP/Port Filtering