Wireless Settings (Wireless) - SMC Networks SMC7004AWBR User Manual

Configuring the Wireless Barricade

Wireless Settings (Wireless)

To configure the Wireless Barricade as a wireless access point
for wireless clients (either stationary or roaming), all you need to
do is define the service set identifier (ESSID), the rates of
transmission of data and of commands, the radio channel, and
the encryption options. Note that the radio channel and the
service set identifier must be set to the same value for the
Wireless Barricade and for all wireless clients.
Channel and SSID
ESSID – The Extended Service Set Identifier for the wireless
network. Also known as the wireless service domain.
Transmission Rate – The rate of transmission of data, the
selections from the drop-down menu are: Fully Automatic,
11 Mbps, Automatic 1 or 2 Mbps, 2 Mbps, or 1 Mbps.
44