Diagnostic Test; Figure 74: Diagnostic Test - SMC Networks SMC7904WBRAS-N2 V2 User Manual

D T
IAGNOSTIC EST
The diagnostic test shows the test results for the connectivity of the
physical layer and protocol layer for both LAN and WAN sides.

Figure 74: Diagnostic Test

The following items are displayed on this page:
Select the Interface — Selects the WAN connection. (Default: vc0)
◆
Run Diagnostic Test — Performs a diagnostic test on the LAN and
◆
WAN side connections.
LAN C C
ONNECTION HECK
Displays the result of a test for connectivity on the LAN port.
◆ Test Ethernet LAN Connection — Displays the connectivity of the
Ethernet LAN port.
ADSL C T
ONNECTION EST
Displays the results of a test for connectivity on the WAN port.
Test ADSL Synchronization — Displays the connectivity of the ADSL
◆
synchronisation.
Test ATM OAM F5 Segment Loopback — Displays the connectivity of
◆
an F5 segment loopback of the permanent virtual circuit (PVC)
connection with your service provider.
Test ATM OAM F5 End-to-end Loopback — Displays the connectivity
◆
of an F5 end-to-end loopback integrity test of the permanent virtual
circuit (PVC) connected to your service provider.
Test ATM OAM F4 Segment Loopback — Displays the connectivity of
◆
an F4 segment loopback of the permanent virtual circuit (PVC)
connection with your service provider.
Test ATM OAM F4 End-to-end Loopback — Displays the connectivity
◆
of an F4 end-to-end loopback integrity test of the permanent virtual
circuit (PVC) connected to your service provider.
– 126 –
| Diagnostics
C 10
HAPTER

Diagnostic Test