By default, secondary IP is disabled. Enable secondary IP, and the page as shown in the following figure appears.
The following table describes the parameters in this page:
Field
IP Address
Subnet Mask
Secondary IP
IGMP Snooping
3.4.2
DHCP Settings
Dynamic Host Configuration Protocol (DHCP) allows the individual computer to obain the TCP/IP configuration
from the centralized DHCP server. You can configure this router as a DHCP server or disable it. The DHCP server
can assign IP address, IP default gateway, and DNS server to DHCP clients. This router can also act as a surrogate
Enter the IP address of LAN interface. Its valid value is in the range of
192.168.2.2 to 192.168.2.254. The default IP address is 192.168.2.1.
Enter the subnet mask of LAN interface. Its valid value is in the range of
255.255.0.0 to 255.255.255.254.
Select the checkbox to enable the secondary LAN IP. The two LAN IP address
must be in the different network.
Enable or disable IGMP snooping.
20
Description