Adsl Settings - SMC Networks SMC Barricade g SMC7904WBRA2 User Manual

C
ONFIGURING THE

ADSL Settings

Select your Country and Internet Service Provider. This will automatically
configure the Barricade with the correct Protocol, Encapsulation and
VPI/VCI settings for your ISP.
If your Country or Internet Service Provider is not listed in this screen,
you will need to manually enter the settings. Go to "ADSL Settings -
Country or ISP Not Listed" on page 4-9 in the manual for details.
If your ISP uses Protocols PPPoA or PPPoE you will need to enter the
username and password supplied by your ISP.
If your ISP uses Protocol RFC1483 Routed you will need to enter the IP
address, Subnet Mask, Default Gateway and DNS Server address supplied
by your ISP.
Click NEXT to continue.
4-6
ADSL R
OUTER