Configuring The Wireless Barricade; Browser Configuration - SMC Networks SMC7004AWBR User Manual

W
The Wireless Barricade can be configured by any
Java-supported browser including Internet Explorer 4.0 or above,
or Netscape Navigator 5.0 or above. Using the Web
management interface, you can configure the Wireless Barricade
and view statistics to monitor network activity.
Note:
Before you attempt to log into the Wireless Barricade Web-based
Administration, please verify the following.
1. Your browser is configured properly (see below).
2. Disable any firewall or security software that may be running.
3. Confirm that you have a good link LED where your computer
is plugged into the Wireless Barricade. If you don't have a link
light – then try another cable until you get a good link.

Browser Configuration

Confirm your browser is configured for a direct connection to the
Internet using the Ethernet cable that is installed in the computer.
This is configured through the options/preference section of your
browser.
C
IRELESS
NOTE: Before you attempt to configure your router, if
you have access to the Internet please visit
www.smc.com
update to insure your router is running the latest
firmware.
ONFIGURING THE
B
and download the latest firmware
ARRICADE
25