Pairing The Adapter And Headset; Jabra Link 350 Usb Bluetooth Adapter Visual Indicators - Jabra GO 6470 User Manual

Hide thumbs Also See for GO 6470:
Table of Contents

Advertisement

10.4

PaiRing the adaPteR and headSet

to pair your Jabra GO headset and Jabra lInK 350 Usb bluetooth adapter:
1. attach the Usb bluetooth adapter to your pC and turn on the pC (see also the section 10.3: Jabra LINK 350 USB
Bluetooth Adapter Setup and Connection).
2. put the Usb bluetooth adapter in pairing mode by pressing and holding its multifunction button for about 2
seconds — until its blue pairing led turns on and stays lit.
3. If your headset is currently turned on, turn it off by pressing and holding on its multifunction button for about
4 seconds — until its led gives three quick red flashes and then turns off.
4. put your (powered-off ) headset in pairing mode by pressing and holding on its multifunction button for about
4 seconds — until its led lights a constant blue.
5. place the headset close to the Usb bluetooth adapter and wait for a few seconds. when pairing is successful,
you will see the following indicators:
- On the adapter: the led flashes blue quickly five times and turns off.
- On the headset: the led flashes blue five times and then turns off.
6. your headset and Usb bluetooth adapter are now paired and connected.
Figure 47: Jabra GO headset paired with both a mobile phone and the Jabra LINK 350 USB Bluetooth Adapter
10.5

JabRa link 350 uSb bluetooth adaPteR viSual indicatoRS

the Jabra lInK 350 Usb bluetooth adapter includes a pair of closely spaced leds, which light in various colors
and patterns to indicate the status of the adapter and its connections. these are summarized in the table below.
Adapter Status
Connected and ready for use, softphone is current target
Connected and ready for use, softphone is not current target
paired but not connected
pairing mode
pairing succeeded
Online
ringing
muted
Table 7:
Visual signals of the Jabra LINK 350 USB Bluetooth Adapter and their meanings
Jabra GO 6470 User manUal
LED Signal
Constant green
Constant yellow
slow-flashing green
Constant blue
Quintuple (5x) blue flash (displays once)
moderate blue flash
triple blue flash
Constant red
56

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents