10.6
the JabRa link 350 uSb bluetooth Mfb
the Jabra lInK 350 Usb bluetooth adapter includes a single button, which you can use for many purposes
depending on which state the adapter is in (e.g., waiting, active, call-on-hold) and the type of gesture you use on
the button (i.e., tap or press). Its functions and use are similar to the multifunction button on the headset.
the button recognizes the following types of gestures:
- Tap: a short, instantly released tap (not longer than 0.8 seconds).
- Press: press and hold the button for 1 - 3 seconds.
the table below summarizes all of the control possibilities presented by the multifunction button (mfb) .
Function
enter pairing mode (when not in pairing mode)
Cancel pairing (when already in pairing mode)
Connect to a headset that is already in the adapter's pairing list
answer incoming call or go to dial tone* (when no current or held calls
exist)
end active call* (when no other incoming or held calls exist)
switch to incoming or held call* (when on a current call)
Table 8:
Commands that can be issues to the Jabra LINK 350 USB Bluetooth Adapter using its multifunction button
*
softphones only
Jabra GO 6470 User manUal
Press
Tap
(hold 1-3 sec)
57