Jabra Talk 5 Manual

This instruction manual will get you started and ready to make the most of your headset.

ABOUT YOUR JABRA TALK 5

1. Answer/end button, on/off button
2. LED light
3. Charging socket
4. Earhook

WHAT YOUR HEADSET CAN DO

Your Jabra Talk 5 lets you do all this:

• Answer calls
• End calls
• Reject calls*
• Voice dialing*
• Last number redialing*
• Call waiting*
• Place call on hold*

* Phone dependent

Specifications

• Talk time up to 11 hours (phone and network dependent)
• Standby time up to 10 days
• USB cable included
• Weight 10 grams
• Operating range up to 10 meters (appr. 33 feet)
• Headset and hands-free profiles (see glossary)
• Bluetooth^® version 2.1 + eSCO & EDR

GETTING STARTED

You should follow three steps before using your headset:

1. Charge your headset
2. Activate Bluetooth^® on your mobile phone (refer to the manual for your Mobile phone)
3. Pair your headset to your mobile phone

The Jabra Talk 5 is easy to operate. The answer/end button on the headset performs different functions depending on how long you press it.

CHARGE YOUR HEADSET

Make sure that your headset is fully charged for 2 hours before you start using it. Use the supplied USB cable to charge from the computer. When the light indicator (LED) has a solid LED light, your headset is charging. When the solid LED light turns off, it is fully charged.

Please note: The lifetime of the battery will be significantly reduced if your device is left uncharged for a long period. We therefore recommend that you recharge your device at least once a month.

TURNING YOUR HEADSET ON AND OFF

• Press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn on your headset.
• Long press the answer/end button until you see a burst of flashes on the indicator light (LED) to turn the headset off.

Please note that the LED indicator light turns off after 1 minute to save battery. Headset is still active, and light will flash again after tap on the Answer/End button or any call activity. To check if the headset is on, tap the answer/end button once – the LED indicator light will flash, if the headset is on.

PAIRING IT WITH YOUR PHONE

Headsets are connected to phones using a procedure called 'pairing'. By following a few simple steps, a phone can be paired with a headset in a matter of minutes.

1. Put the headset in pairing mode
   • When you turn on your Jabra Talk 5 for the first time, the headset will automatically start up in pairing mode – i.e. it is discoverable for your phone. When the headset is in pairing mode the LED is constantly lit.
2. Set your phone to 'discover' the Jabra Talk 5
   • Follow your phone's instruction guide. First make sure that Bluetooth^® is activated on your mobile phone. Then set your phone to discover the headset. This usually involves going to a 'setup', 'connect' or 'Bluetooth^®' menu on your phone and selecting the option to 'discover' or 'add' a device.*
3. Your phone will find the Jabra Talk 5
   • Your phone will find the headset under name "Talk 5". Your phone then asks if you want to pair with the headset. Accept by pressing 'Yes' or 'OK' on the phone and confirm with the passkey or PIN = 0000 (4 zeros) if asked. Your phone will confirm when pairing is complete.

Put the headset in pairing mode manually

In case of unsuccessful pairing, put the Jabra Talk 5 into pairing mode manually. Make sure the headset is off. Press and hold the answer/end button for approximately 5 seconds until the LED has a constant light. The LED will flash before the light is constant – keep holding down the button until light is constant. Then follow the steps 2 and 3 above.

* Phone dependent

WEAR IT HOW YOU LIKE IT

The Jabra Talk 5 is designed to wear with an earhook but it can also be worn without the earhook by simply inserting it in your right or left ear. If you prefer to use the earhook, click it on as shown on the illustration.

For optimal performance, wear the Jabra Talk 5 and your mobile phone on the same side of your body or within line of sight. In general, you will get better performance when there are no obstructions between your headset and your mobile phone.

HOW TO

Answer a call

• Tap the answer/end button on your headset to answer a call.

End a call

• Tap the answer/end button to end an active call.

Make a call

• When you make a call from your mobile phone, the call will (subject to phone settings) automatically transfer to your headset. If your phone does not support this function, tap on the answer/end button on the Jabra Talk 5 to receive the call in the headset.

Reject a call*

• Press the answer/end button when the phone rings to reject an in-coming call. Depending on your phone settings, the person who called you will either be forwarded to your voice mail or hear a busy signal.

Activate voice dialing*

• Press the answer/end button to activate the voice-dialing function in the mobile phone. Please consult your phone user manual for more info about using this feature.

Redial last number*

• Double tap the answer/end button.

Call waiting and placing a call on hold*

• This lets you put a call on hold during a conversation and answer a waiting call.
• Press the answer/end button once to put the active call on hold and answer the waiting call.
• Press the answer/end button to switch between the two calls.
• Tap the answer/end button to end the active conversation.

Functions marked with * are dependent on your phone supporting these features. Check your phone's user manual for further information.

* Phone dependent

WHAT THE LIGHTS MEAN

* Jabra Talk 5 is equipped with Jabra Discreet Light feature, meaning that light indicator (LED) turns off after 1 min of non-activity. Headset is still active, and light will flash again after a tap on the answer/end button or any call activity.

USING JABRA TALK 5 WITH TWO MOBILE PHONES

Jabra Talk 5 is capable of having two mobile phones (or Bluetooth^® devices) connected to the headset at the same time. This will give you the freedom of having only one headset to operate both your mobile phones.

In order to use the headset with two mobile phone please make sure you have "paired" the Jabra Talk 5 with both phones. See the section "PAIRING IT WITH YOUR PHONE" for instructions.

Once you have "paired" your headset with two phones simply make sure your headset is on, and that Bluetooth^® is enabled on the phones and the headset will then automatically connect to both phones.

Please note that Last Number Redial will dial the number from the last outgoing call, independent of the mobile phone, and the Voice Dialing function will only work on the last paired mobile phone.

If you are on a call and receive a second call you will be alerted by a tone. You can then:

• Put the first call on hold and accept the incoming call by press-ing the Answer/end button
• Switch between the two active calls by pressing the Answer/ end button again
• Tap the Answer/end button once to end the first call and accept the new incoming call

TAKING CARE OF YOUR HEADSET

• Always store the Jabra Talk 5 with the power off and safely protected
• Avoid storage at extreme temperatures (above 45°C/113°F – including direct sunlight – or below -10°C/14°F). This can shorten battery life and may affect operation. High temperatures may also degrade performance.
• Do not expose the Jabra Talk 5 to rain or other liquids.

© 2018 GN Audio. All rights reserved. Jabra^® is a registered trademark of GN Audio. The Bluetooth^® word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by GN Audio is under license.

Made in China
MODEL: OTE9

Declaration of Conformity can be found on www.jabra.com/doc