Headset Controls And Signals - Jabra GO 6470 User Manual

7.5

headSet contRolS and SignalS

all Jabra GO headsets feature a collection of controls and indicators that enable you to manage and monitor your
calls. these are:
1. Multifunction button
this button is located near the back of the headset. through a combination of taps, double-taps, short presses
and long presses, you will be able to execute all of the most-needed functions, including answering a call,
hanging up, switching between held calls, and more.
2. Touch panel
this touch-sensitive panel is similar to the touch pad included with many laptop computers. It enables you to
adjust the speaker volume and mute/unmute the microphone.
3. Audio signal tones
the headset generates several types of soft signal tones to let you know when you have an incoming
call, muted call, call on hold, low battery, or other type of event. It also responds each time you use the
multifunction button.
4. Headset visual indicator
a multicolor led lets others see when you are on the phone and also gives feedback for certain types of
events, such as low battery, incoming call, etc.
2
Figure 27: Jabra GO headset controls and indicators
The Multifunction Button
the table below summarizes the various gestures recognized by the multifunction button. the terms listed in the
table are often used in this manual when describing how to use the headset.
Gesture name
tap
double tap
press
long press
Table 3: Gestures for using the headset multifunction button; the terms here are used throughout this manual.
3
How to make it
tap and release instantly (not longer than 0.8 seconds).
two quick taps (less than half a second between them).
press and hold the button for 1 - 3 seconds.
press and hold the button for 3 - 5 seconds.
Jabra GO 6470 User manUal
1
4
35