Setting General User Preferences - Jabra GO 6470 User Manual

8.7

Setting geneRal uSeR PRefeRenceS

when you are not using the headset, you are able to access the general user preferences on the Jabra GO base.
Use this function to adjust your hearing-protection settings, switch to wideband or narrowband audio, control
call recording, set the screen language, disconnect the headset or re-start some or all of the setup wizard.
Figure 40: Finding the general user preferences
1. wait until you have no active calls and will not need the phone for a few minutes.
2. touch the icon in the upper-right corner of the touchscreen (available only when all connected phones
are idle).
3. the Settings menu opens. select one of the following:
- Personal Setup: touch here to adjust display brightness, dimming timeout, set base-speaker volume for
your desk-, mobile-, and softphone ringtones, adjust touch click-volume and to select tone or voice tags.
- IntelliTone: touch here to go to the settings for protecting your hearing. see also the section 2.2: Protecting
your Hearing with SafeTone™ for complete details about this feature.
- Wideband: touch here to set the Jabra GO base to transmit wideband or narrowband audio to the
headset. see also Section 7.10: Narrowband vs. Wideband Audio for details about this feature.
- Disconnect HS: touch here to break the wireless connection from the headset to the Jabra GO base. you
might do this if you want to use a different headset.
- Language: touch here to change the language displayed for the touchscreen text.
- Disable / Enable audio detection: determines whether the audio link opens automatically when sound is
detected on the Usb interface. the equivalent setting is available in the audio tab for your Jabra device in
Jabra Control Center. audio detection is enabled by default.
- Software Update: provides information on where to find the latest firmware versions for downloading to
your Jabra headset and base
- Advanced: touch here to run some or all of the setup wizard for configuring the connection from the Jabra
GO base to your desk phone, mobile phone and/or computer. see also Section 8.9: Re-running the Setup
Wizards.
- About: touch here to view a few technical details about the Jabra GO base, such as firmware revision,
copyright details, etc.
4. follow the instructions on your screen for the option you selected.
SETTINGS
Personal Setup
Inntellitone
Wideband
Jabra GO 6470 User manUal
50