Jabra GO 6470 User Manual page 27

to place a call through your softphone, dial the number or choose a contact using your softphone program. the
audio connection to your headset will activate automatically as soon as your recipient's phone begins ringing.
Note: If you are using an unsupported softphone, then you may need to use Jabra Control Center to ac-
tivate the audio link from your pC to your headset before dialing. see the pC suite online help for details.
see also Chapter 5: Installing and Running the Jabra PC Suite.
Calling through a Desk Phone
Figure 20: Placing a call with your headset and desk phone
to place a call through your desk phone:
1. If necessary, set the desk phone as the current target for your headset (see also Section 6.2: The Target Phone
Concept.)
2. do one of the following to get a dial tone:
- If you are using a handset lifter or electronic hookswitch:
activate the audio link to the headset by doing one of the following: tap the headset's multifunction
button or touch the call icon on the touchscreen. you should now hear a dial tone.
- If you do not have a handset lifter or electronic hookswitch:
activate the audio link to the headset by doing one of the following: tap the headset's multifunction
button; touch the call icon on the touchscreen; or lift the headset from the Jabra GO base (if enabled, see
Section 8.8: Headset Docking-Operation). then lift your desk phone handset from the receiver and set it
aside — or press the headset button, if your desk phone has one — to get a dial tone.
3. dial the number using your desk phone's buttons.
Jabra GO 6470 User manUal
27