How To Answer A Call - Jabra GO 6470 User Manual

6.4

how to anSweR a call

Figure 21: Answering a call
when there is an incoming call, you will hear a ringtone from the phone, Jabra GO base and/or headset. Usually,
the touchscreen indicates which phone is ringing and shows the incoming phone number (if available). the
ringtone played in the headset normally also indicates which phone is ringing (see also Section 7.5: Headset
Controls and Signals).
to answer a call from any connected phone:
1. If you have a desk phone without automatic ring tone detection:
- set the desk phone as the current target by touching the desk-phone icon on the touchscreen or pressing
the headset's multifunction button until you hear the desk phone audio indicator (see also Section 6.2: The
Target Phone Concept).
In this case, you will hear your desk phone ring but will not hear any ringtone in your headset or see any
ring indicator on the touchscreen. this preliminary step of making the desk phone the target is necessary.
Note: this is not necessary if you have a Gn1000 handset lifter or electronic hookswitch connection that
supports ring detection, nor is it necessary for other phone types.
2. do one of the following:
- For desk phones without automatic ring tone detection:
activate the audio link to the headset by doing one of the following: tap the headset's multifunction
button; touch the call icon on the touchscreen; or lift the headset from the Jabra GO base (if enabled, see
Section 8.8: Headset Docking-Operation). then lift the handset from your desk phone and set it aside or
press the desk phone headset button (if present) to answer the call. (In this case, lifting the headset from its
charging cradle will not activate the audio link because the base cannot tell that a phone is ringing.)
- For all other types of phones and desk phones:
do one of the following: Tap the multifunction button, touch the answer-call icon on the touchscreen or
lift the headset from its cradle.
Jabra GO 6470 User manUal
28