Switching Between Your Phone And Headset; Last Number Redial - Jabra GO 6470 User Manual

you can also control the volume and mute functions using the touchscreen; see Section 8.4: Setting Active-Call and
Audio Preferences for details.
Note: a tone will sound to indicate each new volume setting; a double tone indicates that you have
reached maximum or minimum volume. you will also hear a soft tone in the headset to remind you when
microphone muting is active; this signal will repeat occasionally until you reactivate the microphone. If
you hang up while the microphone is muted, it will automatically be re-enabled the next time you place
or answer a call.
6.7

Switching between youR Phone and headSet

It is possible to enable or disable the headset without interrupting your current call.
Desk Phones
to go from desk-phone handset to your headset:
1. If necessary, set the desk phone as the current target for your headset (see also Section 6.2: The Target Phone
Concept.)
2. activate the audio link to the headset by doing one of the following: tap the headset's multifunction button;
touch the call icon on the touchscreen; or lift the headset from the Jabra GO base (if enabled, see Section 8.8:
Headset Docking-Operation).
3. listen to hear if you are now connected through the headset. If you are not connected, then you may need to
press the desk-phone headset button. see also your desk-phone documentation.
4. place the handset on your desk, but do not hang up, because this will terminate your call.
to go from headset to desk-phone handset:
1. lift the handset to your ear.
2. do one of the following:
- If you are using a traditional phone without a headset button or electronic hookswitch, then deactivate the
audio connection to your headset by tapping the headset multifunction button, docking the headset in its
cradle on the Jabra GO base or touching the end-call icon on the touchscreen. (this applies also if you are
using a Gn1000 remote handset lifter.)
- If your desk phone has a dedicated headset port and/or electronic hookswitch, then please see your desk-
phone documentation for details. In some cases, you must press a button on your desk phone, while in
others it will be automatic. also, some phones may terminate the connection if you deactivate the audio
link to the headset (e.g., by tapping its multifunction button or docking it in its charge cradle), while others
may require you to do this before you can speak on the handset. experiment to find out what works best
for you.
Mobile Phones
for mobile phones, the procedure varies by phone model. please see your mobile phone documentation for
details.
Softphones
for softphones, your headset is likely to be your only option, but if other audio devices are connected to your
pC, you may be able to switch to them by changing the audio preferences for windows and/or your softphone
program.
6.8

laSt nuMbeR Redial

Jabra GO is able to send a redial command to the current target phone. this feature requires that the target
phone supports the redial command; check your phones' documentation for details.
to use last-number redial with a phone that supports it:
1. If necessary, set the appropriate phone as the current target for your headset (see also Section 6.2: The Target
Phone Concept.)
2. Double-tap the headset's multifunction button. Jabra GO sends the redial command to the selected target
phone and opens the audio link.
Jabra GO 6470 User manUal
30