Jabra GO 6470 User Manual page 17

Connecting to a Desk Phone without a Headset Port
If your desk phone does not include any built-in support for adding a headset, then connect the Jabra GO base
between the handset and the desk-phone body as described below.
Figure 9: Connecting to a desk phone without a headset port
1. On your desk phone, unplug the handset cable from the phone body at the phone-body side.
2. plug the loose end of your handset cord to the port marked
3. Connect the telephone cord included with your headset from the port marked
the handset port on your desk phone body.
4. your Jabra GO base and desk phone are now connected. note, however, that you must still configure the base
for your specific desk-phone model. the setup wizard usually helps you to do this, but you can also make this
setting at any time using the touchscreen (see Section 8.9: Re-running the Setup Wizards).
on the Jabra GO base.
Jabra GO 6470 User manUal
on the Jabra GO base to
17