View Logs; Figure 14 Report Window Right-Click Menu - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Chapter 3 The Web Configurator
Table 12 Typical Statistical Report Features
SECTION
5
6
7
You can also right-click on statistical reports. In some places, you see the standard browser
menu. In other places (especially on graphs), the following menu appears.

Figure 14 Report Window Right-Click Menu

Click Settings... if you want to change the Flash settings on the Vantage Report server. In
most cases, this is unnecessary. Click About Macromedia Flash Player 8... to get
information about the current version of Flash.

3.6.3 View Logs

The View Logs screen displays the logs related to an individual record in a statistical report.
See Appendix C on page 351
56
DESCRIPTION
Last Days, Settings: Use one of these fields to specify what historical information is
included in the report.
• Select how many days, ending (and including) today, in the Last Days drop-down list.
• Click Settings, and select a specific Start Date and End Date. The date range can
be up to 30 days long, but you cannot include days that are older than Store Log
Days in System > General Configuration. See
When you change any of these fields, the report updates automatically. The Last Days
field returns to zero, regardless of your selection. This way, you can refresh the report by
selecting Last Days again. You can see the current date range in the title (section 4).
Both the Last Days and Settings fields reset to the default values when you click a
menu item in the function window (including the menu item for the same report). They do
not reset when you open or close drill-down reports.
These fields are not available in drill-down reports because these reports use the same
historical information as the main report.
See Section 2.3 on page 34
The graph displays the specified report visually.
• Click the pie view or the bar view icon. You can specify the Default Chart Type in
System > General Configuration. See
• Move your mouse over a slice in the pie chart or a bar in the bar chart to display its
identification.
• Click on a slice in the pie chart to move it away from the pie chart a little.
See Section 2.4 on page 35
statistical report.
In the table,
• Click on a link to drill down into the report. The current report is replaced by a detailed
report for the selected record. The detailed report uses the same historical
information you select in #5.
• If DNS Reverse is enabled in System > General Configuration, the table displays
the domain name, if identifiable, with IP addresses (for example, "www.yahoo.com/
200.100.20.10"). See Section 12.1 on page
• Some reports provide extra information (for example, number of traffic events) in the
table. See each report for more information.
• Click a view logs icon to display the logs related to the individual record. See
See Section 2.4 on page 35
statistical report.
and Appendix D on page 375
Section 12.1 on page
for more information about time in these screens.
Section 12.1 on page
for more information about the source data used by the
317.
for more information about the source data used by the
for information on the logs.
317.
317.
Vantage Report User's Guide