Table 200 Ike Logs - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Table 199 Application Patrol Logs (continued)
LOG MESSAGE
Deactivate App Patrol
has succeeded.
Initialize App. Patrol
has succeeded.
App Patrol Name=%s
Type=%s %s=%d
Protocol=%s Action=%s
App Patrol resources
ran out. User %s is
unrestricted by rule [
%s:%d ]. 1st %s: User
Name, 2nd %s: Protocol
Name, 1% %d: Rule
Index

Table 200 IKE Logs

LOG MESSAGE
%s:%s has not
announced DPD
capability
[COOKIE] Invalid
cookie, no sa found
[DPD] No response from
"%s:%s using existing
Phase-1 SA in %u
seconds. Trying with
Phase-1 rekey.
[HASH] : Tunnel [%s]
Phase 1 hash mismatch
[HASH] : Tunnel [%s]
Phase 2 hash mismatch"
[ID] : Invalid ID
information
[ID] : Tunnel [%s]
Local IP mismatch
[ID] : Tunnel [%s] My
IP mismatch
[ID] : Tunnel [%s]
Phase 1 ID mismatch
[ID] : Tunnel [%s]
Phase 2 Local ID
mismatch
Vantage Report User's Guide
Appendix D ZyWALL 1050 Log Descriptions
DESCRIPTION
Deactivation of application patrol has succeeded.
Initialization application patrol has succeeded.
Packets logging. 1st %s: Protocol Name, 2nd %s: Category Name, 3rd
%s: Default Rule or Exception Rule, 1st %d: Rule Index, 4th %s: TCP
or UDP, 5th %s: Action.
The application patrol daemon (process) resource pool is full, current
login user %s is unrestricted by rule %d of protocol %s. 1st %s: User
Name, 1st %d: Rule Index, 2nd %s: Protocol Name.
DESCRIPTION
%s:%s is the peer IP:Port. Peer has not announced capability.
Cannot find SA according to the cookie.
%s:%s is the peer IP:Port. %u is the retry time. Dead Peer Detection
(DPD) detected no response from peer.
%s is the tunnel name. When negotiating Phase-1, the exchange hash
did not match.
%s is the tunnel name. When negotiating Phase-2, the calculated quick
mode authentication hash did not match.
ID payload is not valid (in Phase-1 is local/peer ID, in Phase-2 is local/
remote policy).
%s is the tunnel name. When negotiating Phase-1, the local tunnel IP
did not match the My IP in VPN gateway.
%s is the tunnel name. When negotiating Phase-1 and selecting
matched proposal, My IP Address could not be resolved.
%s is the tunnel name. When negotiating Phase-1, the peer ID did not
match.
%s is the tunnel name. When negotiating Phase-2 and checking IPsec
SAs or the ID is IPv6 ID.
387