Table of Contents
Advertisement
Chapter 11 Schedule Report
Table 140 Schedule Report > Summary > Add (Daily Report)
LABEL
E-mail Attached
Files
Save Directory
Report Type
Apply Template
Include All Data in a
Single Report
Report Time
Report List
Apply
Reset
Cancel
11.3 Customize Weekly Report Screen
To send scheduled reports by e-mail, you have to enter the SMTP mail server
settings. See
Scheduled reports are limited by the amount of log and traffic information stored in Vantage
Report. For example, if Vantage Report saves three days of information, weekly reports only
consist of information from these three days, not seven days. See
more information.
This feature can send e-mail messages with very large attachments (2+ MB). Some SMTP
mail servers might not accept such large messages. In this case, there is a way to send e-mail
messages without the attachments. See the E-mail Attached Files option in any of the
Customize ... Report screens for more information. If you do not have Vantage Report send
the attachments you can still view the reports. The Vantage Report server backs up all
scheduled reports in the <vrpt_home>\vrpt\data\scheduler folder.
304
DESCRIPTION
Select this if you want Vantage Report to send the selected report(s) as
attachment(s). Vantage Report also saves the selected report(s) on the
Vantage Report server. If you do not select this, Vantage Report only saves the
selected report(s) on the Vantage Report server. These report(s) are stored in
data\schedule
in the Vantage Report installation directory.
This field is read-only. Vantage Report saves a copy of the selected report(s) on
the Vantage Report server. This field displays where the copy is.
Select the format(s) of the selected report(s). HTML format looks like the
statistical reports you can see online.
Select the check box and a template if you want to use a customized report
format.
This field is enabled for if you selected PDF format. Select this if you want to
combine all the selected report(s) into one file.
Select the hour to start generating the report. Vantage Report sends the report
after it finishes generating it. The report generation time depends on the amount
of information in the report. Having Vantage Report generate too many reports
at the same time can affect performance. It is recommended that you vary the
times for your reports.
Select which report(s) you want to generate and send in the e-mail message.
For some reports, you can select additional options. All the bandwidth reports
use the same direction setting.
Use the Select All check box at the bottom to select every report.
Click this to save your settings and close the screen.
Click this to change the settings in this screen to the last-saved values.
Click this to close the screen without saving any changes.
Section 12.2 on page 322
for more information.
Section 12.1 on page 317
Vantage Report User's Guide
for
Advertisement
Table of Contents
Troubleshooting
