Table of Contents
Advertisement
C
H A P T E R
6.1 VPN Site-to-Site
Use these reports to look at the top sources and destinations of traffic in VPN tunnels. Site-to-
site refers to static VPN tunnels between two IPSec devices. Each end must be identified by an
IP address, domain name or dynamic domain name. More detailed site-to-site VPN analysis is
also available for devices using the ZLD firmware platform (like the ZyWALL 1050).
To look at VPN usage reports, each ZyXEL device must record forwarded IPSec
VPN traffic in its log. See the User's Guide for each ZyXEL device for more
information. In most devices, go to Logs > Log Settings, and make sure IPSec
is enabled.
6.1.1 VPN Link Status
Use this report to see which of the device's VPN tunnels are connected.
Click VPN > Site-to-Site > Link Status to open this screen.
Figure 62 VPN > Site-to-Site > Link Status
Vantage Report User's Guide
6
VPN
139
Advertisement
Table of Contents
Troubleshooting
