C
H A P T E R
This chapter provides the minimum requirements to use the web configurator, describes how
to access the web configurator, and explains each part of the main screen in the web
configurator.
3.1 Web Configurator Requirements
The web configurator is a browser-based interface that you can use to set up, manage, and use
Vantage Report. You can run it on the Vantage Report server or on a different computer. Your
web browser should meet the following requirements:
• Internet Explorer 6.0 or later, Firefox 1.07 or later (local or remote)
• JavaScript enabled
• Macromedia Flash Player 7 or later
• Recommended screen resolution: 1024 x 768 pixels
3.2 Web Configurator Access
To access the web configurator, follow these steps:
1 Make sure Vantage Report is installed and running properly. (See the Quick Start
Guide.)
2 Open a browser window, and go to
•
a.b.c.d
configurator on the same computer on which you installed Vantage Report, enter
localhost
•
xxxxx
For example, you might enter
vrpt.
In either case, the web configurator Login screen displays.
Vantage Report User's Guide
The Web Configurator
is the IP address of the Vantage Report server. If you open the web
.
is the port number you entered during installation.
http://localhost:8080/vrpt
http://a.b.c.d:xxxxx/vrpt
or
http://212.100.9.161:9090/
3
, where
37