Table 207 Connectivity Check Logs - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Table 206 System Logs (continued)
LOG MESSAGE
Update the profile %s
has failed because the
HA interface was not
connected.
Update the profile %s
has failed because IP
address of HA
interface was empty.
Update the profile %s
has failed because
ping-check of HA
interface has failed.
DDNS has been disabled
by Device-HA.
DDNS has been enabled
by Device-HA.
Disable DDNS has
succeeded.
Enable DDNS has
succeeded.
DDNS profile %s has
been renamed as %s.
DDNS profile %s has
been deleted.
DDNS Initialization
has failed.
All DDNS profiles are
deleted

Table 207 Connectivity Check Logs

LOG MESSAGE
Cann't open link_up2
Can not open %s.pid
Can not open %s.arg
The connectivity-check
is activate for %s
interface
The connectivity-check
is fail for %s
interface
Vantage Report User's Guide
Appendix D ZyWALL 1050 Log Descriptions
DESCRIPTION
DDNS profile cannot be updated for HA IP address because HA iface is
PPP and not connected, %s is the profile name.
DDNS profile cannot be updated because the IP address of HA iface is
0.0.0.0, %s is the profile name.
DDNS profile cannot be updated because the fail of ping-check for HA
iface, %s is the profile name
DDNS is disabled by Device-HA, because all VRRP groups are
standby.
DDNS is enabled by Device-HA, because one of VRRP groups is
active.
Disable DDNS.
Enable DDNS.
Rename DDNS profile, 1st %s is the original profile name, 2nd %s is
the new profile name.
Delete DDNS profile, %s is the profile name,
Initialize DDNS failed,
All DDNS profiles have been removed.
DESCRIPTION
Can not recover routing status which is link-down.
Can not open connectivity check process ID file.
%s: interface name
Can not open configuration file for connectivity check process.
%s: interface name
The link status of interface is still activate after check of connectivity
check process.
%s: interface name
The link status of interface is fail after check of connectivity check
process.
%s: interface name
401