Table of Contents
Advertisement
Chapter 12 System
7 Click OK to close the Local Area Connection Properties window.
8 Turn on your ZyXEL device and restart your computer (if prompted).
12.2 Server Configuration Screen
Only the
Use the Server Configuration screen to set up mail server and web server configuration for
Vantage Report. See
Configuration to open the Server Configuration screen.
Figure 157 System > Server Configuration
Each field is described in the following table.
Table 146 System > Server Configuration
LABEL
Mail Server
Configuration
SMTP IP Address or
Domain Name
User Name
Password
Sender E-mail
Receiver E-mails
322
account can open this screen.
root
Section 2.2 on page 34
DESCRIPTION
Use this part of the screen to set up the SMTP mail server that Vantage Report
uses for notifications and scheduled reports.
Enter the IP address or domain name of the SMTP mail server on which
Vantage Report has an account to send e-mail messages.
Enter the user name for the Vantage Report account. If the user name is not
required, leave this field blank.
Enter the password for the Vantage Report account. If the password is not
required, leave this field blank.
Enter the complete e-mail address for the Vantage Report account.
Enter the e-mail address you want to be the receiver when Vantage Report
sends e-mail. This is the e-mail address to which Vantage Report e-mail
appears to be sent.
for more information. Click System > Server
Vantage Report User's Guide
Advertisement
Table of Contents
Troubleshooting
