Other Traffic; Platform Selection; Service Settings; Figure 54 Traffic > Customization > Customization (Platform Selection) - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Chapter 5 Traffic
Table 48 Traffic > MAIL > Top Users > Drill-Down
LABEL
MBytes Transferred
% of MBytes
Transferred
Total
View Logs
Back

5.5 Other Traffic

Use these reports to look at the top sources and destinations of any kind of traffic.

5.5.1 Platform Selection

Click Traffic > Customization > Customization to open the Platform Selection screen.
Figure 54 Traffic > Customization > Customization (Platform Selection)
Use this screen to select the ZyXEL firmware platform that the device uses.
Then click Next.

5.5.2 Service Settings

The following screen displays after you select the ZyXEL firmware platform. Use this screen
to add, edit, or remove services that you can view in Other Traffic reports. These services
appear in the Customized Services drop-down box.
You can use services that are pre-defined in Vantage Report, or you can create new services. If
you create new services, you have to specify the protocol and port number(s) for the service.
126
DESCRIPTION
This field displays how much traffic (in megabytes) was generated from the
selected user to each destination.
This field displays what percentage of the selected user's total traffic was sent
to each destination.
This entry displays the totals for the destinations above. If the number of
destinations of traffic from the selected source is greater than the maximum
number of records displayed in this table, this total might be a little lower than
the total in the main report.
Click this icon to see the logs that go with the record.
Click this to return to the main report.
Vantage Report User's Guide