Table of Contents
Advertisement
6.1 Device Auto-Discovery
1 To enable auto-discovery and then
find your device, click Config,
Discovery/Polling.
2 Select the Enable Discovery check
box and click OK.
3 Find your device in the Device List
panel. Double-click the device icon
to access the EMS.
6.2 Add Device(s) Manually
Follow the steps below to add your
device(s) manually.
1 Click Insert, MAP Object, Device.
2 In the MAP Object Properties
screen, enter a descriptive device
name and IP address for the device
and then click OK.
3 Click the Access tab.
4 For initial setup, configure the
specified fields to the default values
listed in the table below.
Field
Read Access Mode
Read/Write Access Mode SNMP V2c
Read, Read/Write and
Trap communities
NetAtlas Workgroup Quick Start Guide
Value
SNMP V2c
public
8
Advertisement
Table of Contents
