Vpn User Status; Figure 78 Vpn > Remote Access > Total Users And Traffic; Table 72 Vpn > Remote Access > Total Users And Traffic - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Figure 78 VPN > Remote Access > Total Users And Traffic
Each field is described in the following table.
Table 72 VPN > Remote Access > Total Users And Traffic
Start Time
End Time
Next Refresh Time
graph

6.2.2 VPN User Status

Use this report to see which of the device's remote access users are connected.
Click VPN > Remote Access > User Status to open this screen.
Vantage Report User's Guide
This field displays the clock time (in 24-hour format) of the earliest traffic
statistics in the graph.
This field displays the clock time (in 24-hour format) of the latest traffic statistics
in the graph.
This field displays how much time remains until Vantage Report automatically
updates the screen. You can also update the screen immediately by clicking the
menu item again.
This time is not the same as the processing time.
The graph shows how the status changes over time.
Y-axis (vertical): the amount of traffic or number of users handled by the device
each minute. Green represents the amount of traffic and red represents the
number of users.
If you allow dynamic VPN tunnels without using xauth, you can see the amount
of traffic, but the users are not counted.
X-axis (horizontal): clock time, minutes only. These minutes represent clock
times between the Start Time and End Time.
Chapter 6 VPN
169