Top Packets Blocked - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Table 111 Security Policy > Firewall Access Control > Top Users Blocked
LABEL
Settings
graph
User
Color
Packets
% of Packets
View Logs
Total

8.1.2 Top Packets Blocked

Use this report to look at the firewall rule that blocked the most packets.
To look at firewall access control reports, each ZyXEL device must record
blocked packets and users in its log. See the User's Guide for each ZyXEL
device for more information. In most devices, go to Logs > Log Settings, and
make sure Access Control is enabled.
Vantage Report User's Guide
DESCRIPTION
Use these fields to specify what historical information is included in the report.
Click the settings icon. The Report Display Settings screen appears.
Select a specific Start Date and End Date. The date range can be up to 30
days long, but you cannot include days that are older than Store Log Days in
System > General Configuration. Click Apply to update the report
immediately, or click Cancel to close this screen without any changes.
TopN: select the number of records that you want to display. For example,
select 10 to display the first 10 records.
These fields reset to the default values when you click a menu item in the
function window (including the menu item for the same report). It does not reset
when you open or close drill-down reports.
The graph displays the information in the table visually.
• Click the pie view or the bar view icon. You can specify the Default Chart
Type in System > General Configuration.
• Move your mouse over a slice in the pie chart or a bar in the bar chart to
display its identification.
• Click on a slice in the pie chart to move it away from the pie chart a little.
This field displays the users from which the selected device blocked the most
traffic, sorted by the amount of traffic for each one. If the number of users is less
than the maximum number of records displayed in this table, every user is
displayed.
Each user is identified by user name.
This field displays what color represents each user in the graph.
This field displays the number of packets the device blocked from each user.
This field displays what percentage each user's number of blocked packets
makes out of the total number of blocked packets that match the settings you
displayed in this report.
Click this icon to see the logs that go with the record.
This entry displays the totals for the users above.
Chapter 8 Security Policy
245