Table 203 Sessions Limit Logs; Table 204 Policy Route Logs - ZyXEL Communications VANTAGE REPORT - V3.0 User Manual

Table 203 Sessions Limit Logs

LOG MESSAGE
Maximum sessions per
host (%d) was
exceeded.

Table 204 Policy Route Logs

LOG MESSAGE
Cann't open
bwm_entries
Cann't open link_down
Cannot get handle from
UAM, user-aware PR is
disabled
mblock: allocate
memory failed!
pt: allocate memory
failed!
To send message to
policy route daemon
failed!
The policy route %d
allocates memory fail!
The policy route %d
uses empty user group!
The policy route %d
uses empty source
address group!
The policy route %d
uses empty destination
address group!
The policy route %d
uses empty service
group
Policy-route rule %d
was inserted.
Policy-route rule %d
was appended.
Policy-route rule %d
was modified.
Vantage Report User's Guide
Appendix D ZyWALL 1050 Log Descriptions
DESCRIPTION
%d is maximum sessions per host.
DESCRIPTION
Policy routing can't activate BWM feature.
Policy routing can't detect link up/down status.
User-aware policy routing is disabled due to some reason.
Allocating policy routing rule fails: insufficient memory.
Allocating policy routing rule fails: insufficient memory.
Failed to send control message to policy routing manager.
Allocating policy routing rule fails: insufficient memory.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Use an empty object group.
%d: the policy route rule number
Rules is inserted into system.
%d: the policy route rule number
Rules is appended into system.
%d: the policy route rule number
Rule is modified.
%d: the policy route rule number
393