Programmable Feature Key Settings Screen; Figure 94 Phone Book > Programmable Feature Key Settings; Table 31 Phone Book > Speed Dial; Table 32 Phone Book > Programmable Feature Key Settings - ZyXEL Communications V300 Series User Manual

Chapter 11 Phone Setup
Each field is described in the following table.
Table 31 Phone Book > Speed Dial
LABEL
Speed Dial
Settings
Speed Dial Key 1
~ 9
Apply
Reset

11.6 Programmable Feature Key Settings Screen

You can program the custom keys on the V300 to automatically control certain supplementary
call services, such as caller ID, call forwarding, call waiting, and so on. These services are
generally available from your VoIP service provider. The call functions available, and the
codes you use to control them, may differ from one service provider to another.
Click VoIP > Phone > Programmable Feature Key Setting. The following screen displays.
Figure 94 Phone Book > Programmable Feature Key Settings
Each field is described in the following table.
Table 32 Phone Book > Programmable Feature Key Settings
LABEL
Programmable
Feature Key 1~6
Apply
Reset
110
DESCRIPTION
Enter the SIP URI (peer-to-peer call) that you want the V300 to call when you use
this speed dial key.
Click this to save your settings.
Click this to set every field in this screen to its last-saved value.
DESCRIPTION
Enter the feature code you want the V300 to use when you press this feature key.
Click this to save your settings.
Click this to set every field in this screen to its last-saved value.
V300 User's Guide