Enabling And Disabling Features; Entering Numbers, Letters And Symbols; Figure 8 Example: Dhcp - ZyXEL Communications V300 Series User Manual

Chapter 3 Using the LCD Screen

3.3 Enabling and Disabling Features

Many of the V300's LCD screen menus allow you check a feature's settings and then edit the
setting. Take the following steps to check a feature's current setting and then enable or disable
the feature. This example uses the DHCP feature.
1 Select the feature you want to configure. In this example, press MENU to enter the menu
system, then select Adv Setting. In the Adv Setting menu, select DHCP.
The following screen displays:

Figure 8 Example: DHCP

1. DHCP
Off
2 To change the setting to ON, press
If later you decide you want to use static IP or PPPoE, then you do not need to
come into the DHCP menu to disable it; rather, just go into one of those other
menus and enable one of them. This automatically turns DHCP off.

3.4 Entering Numbers, Letters and Symbols

When you enter information into the V300 (when setting up a phonebook entry, for example)
you may need to enter different kinds of characters. The alphanumeric keypad has four input
modes:
• Number mode
• Uppercase mode
• Lowercase mode
• Symbol mode
Use the # key to cycle between modes.
Not all modes are available in all screens.
When you press a key to enter a character, wait a short time until the cursor moves on to the
next space. Press a key multiple times to access the different characters. For example, in
Uppercase mode press 9 four times to enter "Z".
42
.
V300 User's Guide