Subnet Mask; First And Second Dns Servers; Figure 59 Lcd Menu: Gateway - Edit; Figure 60 Lcd Menu: Subnet Mask - ZyXEL Communications V300 Series User Manual

Chapter 6 LCD Menus: Advanced
6.6.2.1 Default Gateway - Edit
Press in the Gateway screen. The following screen displays.

Figure 59 LCD Menu: Gateway - Edit

3. Gateway
0.0.0.0_
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new gateway IP
address and press

6.6.3 Subnet Mask

Select Adv Setting > Static IP > Subnet Mask. The following screen displays.

Figure 60 LCD Menu: Subnet Mask

4. Subnet Mask
0.0.0.0
The number that displays is the subnet mask your V300 is currently set to use. Press
the subnet mask, or press
6.6.3.1 Subnet Mask - Edit
Press in the Subnet Mask screen. The following screen displays.

Figure 61 LCD Menu: Subnet Mask - Edit

4 Subnet Mask
0.0.0.0_
Use PHONEBOOK to clear the previously-saved settings if any. Enter the new subnet mask
and press

6.6.4 First and Second DNS Servers

Use these screens to enter the IP address(es) of DNS (Domain Name System) servers on your
network. Use 1st DNS for the primary (main) server, and use 2nd DNS if you have
information about a secondary (backup) server.
Select 1st DNS or 2nd DNS in the Advanced Setting > Static IP menu. A screen similar to
the following displays (this example uses the 1st DNS screen).

Figure 62 LCD Menu: First / Second DNS

5. 1st DNS:
0.0.0.0
If a DNS server is already configured, its IP address displays. Otherwise, no IP address
displays. Press
64
1
to save the change. Alternatively, press
to return to the previous screen.
1
to save the change. Alternatively, press
to edit the DNS server settings, or press
to return to the previous screen.
to return to the previous screen.
to return to the previous screen.
V300 User's Guide
to edit