Logs; Chapter 14 Logs; Overview; Logs Screen - ZyXEL Communications V300 Series User Manual

C
H A P T E R

14.1 Overview

This chapter contains information on viewing your V300's logs.

14.2 Logs Screen

Click Maintenance > Logs to open the Logs screen.
You can view logs and alert messages in this screen. Once the log table is full, old logs are
deleted as new logs are created.
Click a column heading to sort the entries. A triangle indicates the direction of the sort order.
Figure 104 Maintenance > Logs
The following table describes the labels in this screen.
Table 42 Maintenance > Logs
LABEL

Logs

Display
Refresh
Clear Log
#
Time
Message
Source
V300 User's Guide
DESCRIPTION
Select a category of logs to view.
Click Refresh to renew the log screen.
Click Clear Log to delete all the logs.
This is the log's index number.
This field displays the time the log was recorded.
This field states the reason for the log.
This field lists the source IP address and the port number of the incoming packet
that caused the log, if applicable.
14
Logs
131