Placing A Call On Hold; Using Voicemail; Making Conference Calls - ZyXEL Communications V300 Series User Manual

Press the MUTE key once to mute a call. Press it a second time to return to the call.

2.3.6 Placing a Call on Hold

When you place a call on hold, you neither receive nor transmit a signal. If your phone system
is configured to use the Music on Hold feature, the person on the other end of the line hears the
preconfigured music (or other audio). Otherwise, they hear nothing.
Press the HOLD key once to place a call on hold. Press it a second time to return to the call.

2.3.7 Using Voicemail

Once you have configured your SIP account's voicemail number on the V300, you can press
the VOICEMAIL key to check your messages.
Use the VoIP > SIP > SIP Settings screen to set the voicemail account number. See
10.2 on page 96

2.3.8 Making Conference Calls

Take the following steps to make a three-way conference call.
1 Either start a call, or receive a call. Make sure you know which line the call is using.
2 Ensure the call is active (you can talk with the other person). Press the Conference key.
This "marks" the first call you want to mix into the conference call.
3 Select another line. You can either receive an incoming call, make another outgoing call,
or resume an existing call that you previously put on hold.
4 Ensure the call is active and press the Conference key again. The three-way conference
call begins. All three parties can talk with one another.
Do not press any other keys between step
have to start again.
You cannot have a conference call and a transferred call ongoing at the same
time.
If the person who started the conference call leaves, the remaining parties can
continue talking in the same conference.
V300 User's Guide
for more information.
Chapter 2 Hardware
2 and step 3. If you do, you will
Section
37