Manusa Operator Visio+ 100 Instruction Manual page 8

0.9.4 Maintenance conditions and necessary equipment
The handling equipment used for the handling and transport of the different parts of the machine must be adequate to
the dimensions of the parts, as well as have the corresponding accessories: slings, cables, etc. The handling equipment
must be stable to withstand the oscillations that occur during transport. Likewise, it must have sufficient load capacity
to transport the different parts of the machine.
0.9.5 Unpacking
Once unpacked, make sure the equipment is complete and check the equipment and accessories for any possible
transport damage. If you notice any type of damage to the packaging, it is likely that one of the units has been
damaged. Do not start an appliance if it has been damaged. If any of the components are missing or the system is
damaged, contact your dealer.
0.9.6 Packing material
The packaging material has been designed so that you can reuse it as long as it has not been damaged in transit. Keep
the original packing material for future transportation.
0.9.7 Degree of electrical and electronic protection
Degree of IP protection not declared.
The Visio + operator must be installed under the canopy.
Manusa / Instruction Manual
D01380EN-v5
8