Manusa Operator Visio+ 100 Instruction Manual page 21

9.5 Locking the operating mode
In order to keep control of the door from misuse and/or unauthorised use, the Manusa control switches can be locked/
unlocked as follows.
Lock
The door will operate normally in the selected mode but the mode cannot be changed until the control switch has
been unlocked.
Smart program switch
This locked by pressing buttons 2 (<) and 4 (>) at the same time for 2 seconds. A small
padlock will be displayed.
Óptima program switch
Keep button 2 pressed down while pressing button
Óptima+ program switch
Press key [2] for 3 seconds
administrator).
Óptima pocket+ program switch
Press key [2] for 3 seconds
Unlock
The door will operate in the mode selected, and the control switch will be accessible to anyone with access to it.
Smart program switch
Press buttons 2 and 4 at the same time for 2 seconds. The program switch will request the
PIN code entered during installation (the default PIN is "1111"). Enter the PIN, selecting the
values using buttons 2 and 4 and validating with button 3. Once unlocked, the padlock will
disappear from the display.
Óptima program switch
Press buttons 2 and
Óptima+ program switch
Press key [2] for 3 seconds
administrator).
OK OK OK OK
and enter a PIN
at the same time.
OK OK OK OK
and enter a PIN
Manusa / Instruction Manual
(configurable as
(configurable as
D01380EN-v5
21