Manusa Operator Visio+ 100 Instruction Manual page 2

In compliance with standard
UNE-EN ISO 12100
standard
• Use and maintenance instruction manual
• EC Declaration of conformity
• Maintenance book
On the other hand, the Technical Building Code states the following:
Spanish Standard UNE 85121 states
The owner shall maintain the facility in safe operating conditions.
•
maintenance organisation that complies with the requirements established in this standard.
• The owner shall comply with all national regulations and other relevant requirements for the door's
maintenance.
Scheduled maintenance
•
commissioned or, if it is not going to be used for a long time, before it is recommissioned.
put the facility out of service
• The owner shall
• The owner of the facility
• Immediately, about any operation perceived as abnormal, or abnormal changes in its direct surroundings.
• Immediately, after putting the facility out of service under dangerous circumstances.
• Before putting the facility out of service for a long time.
• Before recommissioning the facility after it has been out of service for a long time.
• The owner of the facility shall ensure that the safety conditions of the door are checked if:
• The maintenance organisation has changed.
• The use of the building and/or the facility has changed.
• The building or the facility has undergone an important modification.
• It being the case, after an accident in which the facility was involved.
• The owner of the door shall take into account the following for the correct use and operation of the door, and shall:
• Use, conserve and maintain the facility
Contract the revisions and maintenance of the facility
•
applicable.
• Prevent the facility from operating when, directly or indirectly, the owner is aware that they do not meet the
minimum safety requirements.
• Require the authorised maintenance company to provide all the necessary documentation.
• Provide the maintenance company with access to the facility and to the equipment itself for its verification.
Provide the maintenance company with access to the facility and to the equipment itself for its verification.
UNE-EN 16005, this manual has been written in accordance with the international
and includes the following information:
verbatim
the following:
should be carried out by a maintenance organisation, at the latest when the facility is
under dangerous situations.
shall notify
the maintenance organisation in the following cases:
according to the user manual
Manusa / Instruction Manual
To achieve this, the owner shall use a
provided by the manufacturer.
with a maintenance organisation, whenever
D01380EN-v5
2