Manusa Operator Visio+ 100 Instruction Manual page 18

Óptima pocket+ program switch
1. User mode:
ies. Its function can only be changed by the administrator.
Its default function is
2. Closed mode:
mode closes the door and releases the leaves. In doors
with a lock, the leaves will close and be locked by it.
3. Automatic mode:
sor is triggered, either interior or exterior.
4. Open mode:
can be moved by hand.
9.4 Operating modes
Door open
The door will open, after which the leaves can be moved by hand
Smart program switch
Press buttons 2 or 4 on the program switch until the icon flashes
button 3 to validate the selection.
"Open"
The message will be displayed.
Óptima program switch
Press button on the program switch and
Óptima+ program switch
Press button on the program switch and will be displayed
Óptima pocket+ program switch
Press button on the program switch and will be displayed
The key is configurable, so its function var-
"Exit Only".
In doors without a lock, this operating
The door will open whenever a sen-
the door will open, after which the leaves
"Ab"
will be displayed.
Manusa / Instruction Manual
and then press
D01380EN-v5
18