Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Manusa Manuals
  4. Door Opening System
  5. Op. Visio L1H
  6. Installation manual

Manusa Op. Visio L1H Installation Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
DMJOIL101EN - v1
VISIO L1H OPERATOR - INSTALLATION MANUAL
Installation manual
Op. Visio L1H
1

Advertisement

loading

Related Manuals for Manusa Op. Visio L1H

Summary of Contents for Manusa Op. Visio L1H

  • Page 1 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL Installation manual Op. Visio L1H...
  • Page 2 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL TRANSLATED DOCUMENT Read thoroughly all of these instructions before using the unit. INSTALLATION MANUAL This manual includes all the necessary information required to install the product. Keep this manual in a safe place for future reference. VISIO L1H OPERATOR 0.
  • Page 3 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL...
  • Page 4 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 1. INSTALLATION DIMENSIONS AND CHECKS 1.1 LEGEND AND FORMULAE DESCRIPTION FORMULA DOOR CLEAR HEIGHT DOOR CLEAR WIDTH OVERALL OPERATOR WIDTH SLIDING LEAF HEIGHT HM=HL FIXED LEAF HEIGHT HF=HL SLIDING LEAF WIDTH AM=PL+Sp FIXED LEAF WIDTH AF=AH-PL...

  • Page 5: Door Dimensions

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 1.3 DOOR DIMENSIONS 1.3.1 Door width. Fig. Opening width PL = (AH-Dt)/2 Clear width AT = PL/2 + Dt Overall operator width AM = PL + Sp Sliding leaf width AF = AH-PL Fixed leaf width Fig.
  • Page 6 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 1.3.2 Door height. 1.6.1 Fig. Fig. Ceiling line Door clear height HT = HL + 125 Overall door height HR = HT + (5min) Minimum ceiling height HV = HL + 28 Beam height Fig.
  • Page 7 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 2. PREPARE MAIN PROFILE 2.1 DRILLING Space drill holes Fig. Fig. Fig. Herramientas Tools Broca nº9 Drill bit no.9 Drill hole size Ø9 along main profile as shown in diagrams. Fig. Fig.
  • Page 8 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 2.3 ADJUST TRACK PROFILE Fig. Use a previously assembled trolley as shown in the diagram. Fig. Adjust the top wheel as shown in diagram. Fig. Introduce the trolley on the top stile as shown in diagram.
  • Page 9 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 3. MAIN PROFILE AND TOP LINTEL ASSEMBLY 3.1 PROFILES LAYOUT Set out the sections as shown in the diagram. Fig. Fig. 3.2 TOP LINTEL ASSEMBLY 3.2.1 Mark and screw. Fig. Fig. Fig.
  • Page 10 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 3.3 MAIN PROFILE ASSEMBLY 3.3.1 Introduce and mark. Fig. Drill holes in the beam using the main profile as template, as shown in the diagrams. Fig. Fig. Fig. 3.3.2 Drill. Fig. Fig.
  • Page 11 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 4. BOTTOM LINTEL PREPARATION 4.1 MOUNT LOWER LINTEL. 4.1.1 Cut. Fig. Fig. Cut section at A and B. Fig. 4.2.1 A = AF - 40 B= PL + 40 AF Fixed Leaf width, PL Clear 4.1.2 Drill.
  • Page 12 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 4.1.3 Screw. Fig. Nuts & bolts DIN6923 M8 Screw the bottom lintel to the fixed leaf as shown in the diagram. Fig. Leave 40mm in the PL part of the door leaf. Check table for different frame dimensions.
  • Page 13 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 5. FIXED LEAVES / BOTTOM LINTEL (PL) ASSEMBLY 5.1 MOUNT FIXED LEAVES 5.1.1 Drill. Tools Nuts & bolts Nuts & bolts Mark and drill the floor on the inside of the AT in accordance with dimensions.
  • Page 14 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 5.1.2 Position fixed leaves. Position the fixed leaves as shown in the diagrams. Fig. 5.3/5.4/5.5 Fig. Fig. Fig. 5.1.3 Check for plumb. Check door leaves (PL) are parallel throughout the clear height. Fig.
  • Page 15 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 5.1.4 Screw. Nuts & bolts Screw (x3) fixed leaves to top lintel. Fig. 5.7/5.8 D-7504N 4,2x16 Fig. Fig. 5.2 BOTTOM LINTEL (PL) ASSEMBLY 5.2.1 Screw. Screw (x3) bottom lintel (PL) to top lintel. Fig.
  • Page 16 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 6. LATERAL STOPS / LOCK ASSEMBLY 6.1 LATERAL STOPS ASSEMBLY 6.1.1 Insert nuts into profile. Insert 4 nuts distributed in the AT as shown in the diagram. Fig. Insert the nuts in the bottom channel of the main profile.

  • Page 17: Lock Assembly

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 6.2 LOCK ASSEMBLY. Fig. Fig. Fig. Introduce lock and screws/nuts into centre of main profile. Fig. Position the lock at AT/2. Fig. Fig. Screw nuts inside channel. Nuts & bolts Nuts & bolts DIN7380 6x10 DIN6798 M-6...
  • Page 18 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 7. DRAGGING TROLLEYS / ARMS ASSEMBLY. 7.1 TROLLEYS ASSEMBLY. OPENING TO THE LEFT. OPENING TO THE RIGHT. 7.1.1 Distribute the trolleys in the operator 7.1.1 Distribute the trolleys in the operator Fig.
  • Page 19 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL OPENING TO THE LEFT. OPENING TO THE RIGHT. 7.1.3 Lock hooks assembly. 7.1.3 Lock hooks assembly. Fig. Fig. Fig. Fig. Tools Nuts & bolts Attach lock hooks to trolleys 2-3 as shown in the diagrams.
  • Page 20 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 7.3 DRAGGING ARMS ASSEMBLY. 7.3.1 Cut arms. Fig. 7.10 Cut arms as shown in diagram.. Fig. 7.10 OPENING TO THE LEFT. OPENING TO THE RIGHT. 7.3.2 Arms on trolleys assembly. 7.3.2 Arms on trolleys assembly. Fig.
  • Page 21 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL OPENING TO THE LEFT. Fig. 7.14 Nuts & bolts Nuts & bolts DIN7380 6x10 DIN6798 M-6 Screw left hand arm to left hand trolley (1) as shown in the diagram. Fig. 7.14 7.4 FINAL LAYOUT OF TROLLEYS / ARMS OPENING TO THE LEFT.
  • Page 22 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 8. GUIDE AND SLIDING LEAF ASSEMBLY 8.1 FLOOR GUIDES ASSEMBLY 8.1.1 Mark and drill the floor. Fig. Floor guides position. (On the side of the fixed leaf as shown in the diagram) Fig.
  • Page 23 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 8.1.2 Screw in the guides. Fig. Fig. Insert rawlplugs intro the holes which have been drilled. Assemble guide as shown in the diagrams. Fig. Fig. 8.2 SLIDING LEAVES ASSEMBLY. 8.2.1 Insert the screws into the square-section bars. DET.
  • Page 24 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 8.2.2 Leaves hanger. Fig. Fig. Fig. 8.10 Support the leaf on the guide as shown in Fig. the diagram. Insert the screws so they hang from the trolleys as shown in the diagrams. Fig.
  • Page 25 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL Fig. 8.11.a 8.2.3 Adjust sliding leaves. Fig. 8.14 Fig. 8.13 Spacing between frame as per the table. Fig. 8.12 Adjust depth of sliding leaves as shown in the diagram. Frame spacing table Fig.

  • Page 26: Drive Unit Assembly

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 9. DRIVE UNIT / BELT ANCHOR ASSEMBLY 9.1 DRIVE UNIT ASSEMBLY 9.1.1 Insert nuts in main profile. Fig. Insert nuts in main profile as shown in the dia- Fig. Fig. Fig. 9.1.2 Layout of components PL<=1000 OPENING TO THE RIGHT PL<=1000 OPENING TO THE LEFT PL<=1000...
  • Page 27 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 9.1.4 Drive unit with extension kit PL>1000 assembly. OPENING TO THE RIGHT PL>1000 Fig. Fig. Unscrew motors ( ) and electronics unit ( ) from the drive assembly. Fig. Screw onto the extension plate, and , in the drive unit plate as illustrated.
  • Page 28 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 9.1.5 Layout of components PL>1000 OPENING TO THE RIGHT PL>1000 OPENING TO THE LEFT PL>1000 9.1.6 Screw in the drive unit. Screw the drive unit to the main profile as shown in the diagrams. Fig.

  • Page 29: Belt Assembly

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 9.2 BELT ASSEMBLY Cut the belt as shown in the diagram. Fig. 9.12 See table for belt length. Fig. 9.15 Fig. 9.12 Place the anchors along the belt as shown in the diagram.

  • Page 30: Cover Assembly

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 10. COVER ASSEMBLY 10.1 BOTTOM AND FRONT COVER PRE-ASSEMBLY Fig. 10.1 Fig. 10.2 Assemble bottom and front cover as shown in diagrams. Fig. 10.1 Fig. 10.2 Fig. 10.3 10.2 BRACKETS 10.2.1 Insert nuts. Fig.
  • Page 31 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 10.2.2 Brackets assembly. Fig. 10.6 Fig. 10.7 Nuts & bolts Nuts & bolts Nuts & bolts Mount brackets (x4) onto the main profile as shown in the diagrams. Fig. Fig. 10.6 10.7 DIN6798 M-6 DIN7380 6x14...
  • Page 32 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 10.3.3 Bottom and front cover assembly Assemble bottom cover onto brackets as shown in the diagram. Fig. 10.12 Fix bottom cover as shown in the diagram. Fig. 10.13 Close front cover as shown in the diagram. Fig.
  • Page 33 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 10.3.4 Side caps assembly. Fig. 10.15 10.15.1 10.15.2 10.15.1 10.15.2 Nuts & bolts Screw end covers to both ends of the cover as shown in the diagrams. Fig. 10.15 10.15.1 10.15.2 4.2X13 CE-PLUS...
  • Page 34 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 11. MANUAL UNLOCK ASSEMBLY 11.1 REMOVE FRONT AND BOTTOM COVER Fig. Fig. 11.1 11.2 Open front cover. Fig. 11.1 Release the bracket attachments for the bottom cover. Fig. 11.2 Fig. 11.3 Remove the bottom cover and the front cover.
  • Page 35 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 11.2 MANUAL UNLOCK ASEMBLY 11.2.1 Lock attachment piece assembly. Fig. 11.6 Fig. 11.7 11.7.1 11.7.1 Nuts & bolts Nuts & bolts DIN7380 6x10 DIN6798 M-6 Screw the piece to the lock as shown in the diagram. Fig.
  • Page 36 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 11.2.3 Toothed piece assembly. Fig. 11.9 11.9.1 11.9.1 Fig. 11.10 Insert the piece onto the bottom cover as shown in the diagrams. Fig. Fig. 11.9 11.10 Ensure that the bolt rests in the slot and is centred with respect to the hole in the bottom cover as shown in the diagram.
  • Page 37 DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 11.2.5 Toothed cylinder assembly. Fig. Fig. 11.13 11.14 Insert the toothed cylinder as shown in the diagrams. Fig. 11.13 Fig. 11.14 Push it in all the way until it snaps into place. 11.2.6 Operate lock manually.

  • Page 38: Main Wiring Diagram

    DMJOIL101EN - v1 VISIO L1H OPERATOR - INSTALLATION MANUAL 12. WIRING 12.1 MAIN WIRING DIAGRAM Fire alarm connection Outside key switch Side screen sensor Photocells Optima selector Emergency push button Receiver (green) Emitter (yellow) Smart selector Manusa Planar Radar Manusa infrared sensor...

  • Page 39: General Connections

    Side screen sensor Touch-less switch - Inst. is the customer’s responsability. - The cables are supplied by Manusa. 12.3 HOW TO RUN THE SELF-ADJUSTMENT A. Using the Optima selector 1. Check that leaves are in closed position before running the self-adjustment procedure.
  • Page 40 Av. Vía Augusta, 85-87, 6 08174 Sant Cugat del Vallés The manufacturer reserves the right to make modifications Barcelona - España without prior notice. Tel. +34 902 321 400 Fax +34 902 321 450 Last revision: February 2014 www.manusa.com...