Manusa Operator Visio+ 100 Instruction Manual page 19

Door closed
The door will close and the automatic lock will activate if installed.
The door won't open with the radar signal.
Smart program switch
Press buttons 2 or 4 on the program switch until the
button 3 to validate the selection.
"Closed"
The message will be displayed.
Óptima program switch
Press button on the program switch and
Óptima+ program switch
Press button on the program switch and will be displayed
Óptima pocket+ program switch
Press button on the program switch and will be displayed
Note: To make exiting easier during the closing cycle, the leaves will reopen if the sensor is triggered or the
interior button pressed. A new closing cycle will then b attempted until the leaves are fully closed.
Manusa technicians can configure the delay before the lock is activated, giving the user more time to reach
the door and exit before the leaves are locked.
Door in automatic mode
The door will open whenever a sensor is triggered, either interior or exterior.
Smart program switch
Press buttons 2 or 4 on the program switch until the
button 3 to validate the selection.
Óptima program switch
Press button on the program switch and
icon flashes and then press
"CE"
will be displayed.
icon flashes and then press
"AU"
will be displayed.
Manusa / Instruction Manual
D01380EN-v5
19