Table of Contents
Advertisement
2.1
Unpacking the AES-100
Before installing, check if all the components of the AES-100 package are included. Observe the safety rules
carefully when you are making the connections.
2.2
Additional Installation Requirements
In addition to the contents of the package, you need additional hardware and software components before you
install and use your product. These components include:
•
A computer with Ethernet 10Base-T or 100Base-TX NIC (Network Interface Card)
•
WAN service provided by a local phone company
•
A computer with terminal emulation software configured to the following parameters:
!
VT100 terminal emulation
!
9600 bps
!
No parity, 8 data bits, 1 stop bit
!
No flow control
2.3
Front Panel
The following figure shows the front panel of the AES-100.
Hardware Installation
Hardware Installation
This chapter shows you how to install the AES-100 hardware.
AES-100
Chapter 2
2-1
Advertisement
Table of Contents
