Table 28-2 Command Summary: Enable Mode; Ip Route Static - ZyXEL Communications Dimension GS-3012 User Manual

help
logout
exit
history
enable
disable
configure
no logging
arp
interface <port-
number>
show
ip
ip arp
ip route

ip route static

hardware-monitor
<C|F>
system-information
vlan1q
spanning-tree
mac
lacp
trunk
radius-server
port-access-
authenticator
Introduction to CLI

Table 28-2 Command Summary: Enable Mode

COMMAND
gvrp
port-isolation
config
address-table
static
address-table
<all>
<mac|vid|port>
Dimension GS-3012 Gigabit Ethernet Switch
DESCRIPTION
Displays help information.
Exits Enable (or privileged) mode.
Exits Enable (or privileged) mode.
Displays a list of command(s) that you
have previously executed.
Accesses Enable (or privileged) mode.
Exits Enable (or privileged) mode.
Accesses Configuration mode.
Clears the system log.
Flushes the ARP (Address Resolution
Protocol) table.
Clears the interface status of the
specified port(s).
Displays IP related information.
Displays the ARP table.
Displays IP routing information.
Displays IP static route information.
Displays current hardware monitor
information with the specified
temperature unit (Celsius C or Fahrenheit
F).
Displays general system information.
Displays GVRP setting.
Displays port isolation setting.
Displays Spanning Tree Protocol (STP)
settings.
Displays static MAC address table.
Displays MAC address table.
You can sort by MAC address, VID or
port.
Displays Link Aggregation Control
Protocol information.
Displays link aggregation information.
Displays RADIUS server settings.
Displays all port authentication settings.
28-7